- Standard 19 inches, 2U whole aluminum case.
- Exquisite craftsmanship.
- Particular materials, such as whole aluminum adjusting knob, Teflon audio line.
- Wiredrawing and oxidation makes surface bright, clean and elegant.
- Professional radio power tube SD2931.
- LCD displays working frequency, volume, FETMOS temperature, forward power, reflected power and SWR.
- Provided with the series of protection function, own active protection and raise alarm prompts once meet any trouble while working.
- Accurate operating index and perfect protection measures make you are more aware of the operating status of your machine.
- Easily installation and simply operations.
- High quality and excellent technical performances.
- Each machine has been examined strictly by a series of quality inspection and function test to guarantee best operating function.
- RF Output Power: 0 to 150 Watt, 100mW/Step
- Frequency range: 87-108 Mhz, 100Khz/Step
- AC power source: AC100V-120V or AC220V-240V ±10% ,50-60Hz, single phase
- Frequency Stability: better than ±100Hz
- S/N Ratio: More than 50dB
- Distortion: less than 0.1%
- Modulation: FM,±75KHz peak deviation
- Transmission Signal: FM Stereo or Mono
- Tuning Design: Stable PLL Technology
- Harmonic suppression: < -65dBC
- Stereo Separation: More than 40db
- RF Output Connector: N Type (L16) -female
- RF Output Impedance: 50 ohm
- Audio channel Frequency Response: 50 - 15000Hz ±0.15dB
- Audio Input Level: -15db, Max -30db
- Audio Input Connector: RCA type
- AUX Input Connector: BNC type -female
- Operating temperature range: -10 to 45 ℃
- Size of Transmitter Unit: 483mm * 400mm * 89mm (19" Standard 2U case)
- Shipping Weight: 8.5Kg
With a good antenna the FM transmitter will broadcast better. The transmission range depends on many factors. The true distance is based on the sensitivity of the receiver, antenna of the receiver, building and other obstructions which are between the transmitter and receiver. The distance will much more in open countryside.